Radiator Treatment, Injection Nozzle, and Components at CVT

Cars do need periodic maintenance, in because this treatment will make the car's performance becomes more leverage. But in addition to the care, condition and the engine had to be considered by the vehicle owner. Suppose it just by knowing how to work or name - the name of the machine parts that are in your car. By knowing how to work in the hope that you can treat and even fix your own car before your car gets worse if there is damage. Of the many car parts, Radiator Maintenance, Injection Nozzle, and the CVT components that must be considered.

- Radiator Care

Corrosion is one of the factors triggering the leak in the radiator, not just the impact or collision can also be a major factor. For materials such as filter, it is another cause water radiator heat and pressure. The cause - the cause of this may lead to the formation of cavities or cracks in the plate - plate (fiber) radiator. Places where water seeps out. Because if the radiator is leaking, the cooling system can not work properly. also result in the engine temperature can not be controlled and finally overheating occurs. Because the machines were forced to work without the presence of cooling. Due to excessive heat, the engine sounds are not normal, underpowered and wasteful of fuel, resulting in even broke down while driving in the middle of the road.

Therefore, prevention needs to be done, here is how to prevent it:

   1. Do check the radiator or repeated routinely on reserve tank. If the surface water in the tank is at least a line, then immediately fill water into the reserve tank.
   2. Use a special radiator fluid when filling the radiator. Because in addition to help the cooling process, the liquid is also contained in a substance that can reduce corrosion on the radiator and engine
   3. Clean radiator, especially by spraying water on the radiator fins
   4. Examine the possibility of leakage of either the hose or radiator. Hose leaks can also be viewed manually by looking at the presence or absence of droplets. But to check for leaks in the radiator must use a special tool. Radiator in your vehicle will be checked with this tool when it comes to the garage.
   5. Cooling system performance and conditions will be preserved and maintained radiator if you do the service regularly




- Injection Nozzle

Injection nozzle is the part that receives a high-pressure fuel and injected into the combustion chamber. when fuel is pumped by the injection pump to be larger than the spring load pressure, the strength pushed him onto the nozzle needle. and this is what will cause the spring pressure become blocked or clogged and the fuel will be injected into the combustion chamber. But the injection pressure can be set by way of distinguishing penyetelnya shim thickness, and effectively will change the load on the spring.

- Components of the CVT

Many people ask "how do I work on the CVT? It is simpler than a conventional engine or transmission machinery. All components contained in a box CVT CVT or by naked eye is shaped swing arm motor matic left in us, and look so great too heavy. inside there are three components, namely the adjustable rear, front pulley, and v-belt. Pully front connected to the engine crankshaft. while the rear is connected to the as-wheels. that connects the front to the rear pulley is v-belt. Thus is the way the components the CVT may be many people who ask how it works, and it is very simple and easy to understand.